Jump to content

millie messing up and down


K. Szymaszek

Recommended Posts

I was thankfully practicing a design before starting on a quilt today and when i went to put needle down she kept on going up and down. I hit all the buttons but would not stop unless I impressed the black button and then yellow button. It also will not stop in the down position. It also acts the same way from the back. I am guessing it is not the needle up down adjustment as it wont shut off unless I impress the black button and yellow button. Any suggestions? Thanks K

Link to comment
Share on other sites

K:  I don't know about the Millie's or any other APQS regulated machine for that matter, but I have an Intellistitch fitted Gammill Clasic that will do about the same thing once in a while.  The only way I can stop it is to power the machine down.  Turn it back on an it works properly.  Kasa engineering thinks it's a switch problem.  I've replaced the switch but it does recur occasionally.  Not much help, huh?  Well I guess I'm trying to say maybe replacing the single stitch switch will correct the problem.  Good luck.  Jim 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...