Quiltinglady63 Posted January 22, 2008 Report Share Posted January 22, 2008 Can anyone tell me why I can\'t get the computer to do a roll across, then I jog it to the start position and then it will go off the quilt about 3 feet, and thats where it starts at to do a single motif but not a complete row. Thanks Brenda Link to comment Share on other sites More sharing options...
Ammoman Posted January 22, 2008 Report Share Posted January 22, 2008 I\'m having trouble understanding the question. Can you rephrase it? My first response would be to make sure the program is Zeroed after you Jog into position and before you hit Run. Link to comment Share on other sites More sharing options...
Stagecl Posted January 22, 2008 Report Share Posted January 22, 2008 Is it possible that you have a motif loaded on the screen and not a e2e pattern? If you have a e2e on the screen, did you put in the quilted width? If you did not add the quilted width, it will only do one repeat. Not sure if I totally understand the question either. Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted January 22, 2008 Author Report Share Posted January 22, 2008 When I jog it to the place where I want it to start and then I hit the R button it will run off the quilt and start somewhere else and I have the right size in the width box. Thanks Brenda Link to comment Share on other sites More sharing options...
quiltingtina Posted January 22, 2008 Report Share Posted January 22, 2008 Check that the box that says Locate Pattern Start (on execute page) is checked in the "Start of Pattern". (Sounds like it is at upper left corner maybe) Good Luck! Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted January 23, 2008 Author Report Share Posted January 23, 2008 Can anyone help it worked fine yesterday. Thanks Brenda Link to comment Share on other sites More sharing options...
Stagecl Posted January 23, 2008 Report Share Posted January 23, 2008 Did you call Stan or Butch for help at CQ headquarters? or tried calling Elaine Glimore? I am assuming you have a CQ. When I have problems...they are so helpful at CQ. Cheryl Link to comment Share on other sites More sharing options...
smorris Posted January 23, 2008 Report Share Posted January 23, 2008 Hi Tina\'s suggestion sounds like it might be the answer. To help you further we need to know: what design you are using - is it an E2E or a motif Are you using the default setting or one of the arrays Where on the pattern is the start point (in the middle or the edge) What is selected in the Locate Pattern Start box Did you set the pattern up in Boundary It sounds to me like you could be using a motif where the start point is right of where you have your hopping foot. Let us know how you go. Sue in Australia Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted January 24, 2008 Author Report Share Posted January 24, 2008 Igot it to work this morning.I shut down the computer then turn it back on.Then set everything back up just like I had before it works now, don\'t know what happen but it works. Thank God, Thanks For Your Help Brenda Link to comment Share on other sites More sharing options...
michaelalan Posted January 24, 2008 Report Share Posted January 24, 2008 when all else fails, re-boot......:cool: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.