alison Posted December 8, 2008 Report Share Posted December 8, 2008 Hoping someone can help. I have been using my millie all morning with no problems at all. After reaching the end of a block, i finished off the thread, went to the next spot and put the needle down and suddenly there was a loud clattering sound. I stopped checked for loose threads in the bobbin, and oiled the bobbin and rethreaded everything to start again but it is still making a very abnormal clattering. The stitch is ok , top and bottom tension ok just this scary noise. Dont know what to do or look at any suggestions would be gratefully accepted!!!PLEASE I have a pile of quilts waiting for me to get to and of course everyone wants them for Christmas. GRRRRR. ThanksAlison Link to comment Share on other sites More sharing options...
Busy Quilting Posted December 8, 2008 Report Share Posted December 8, 2008 Alison, I know others have said they get a loud noise if the gear box grease needs repacking. If you have an APQS machine then I would be contacting Sue Morris. Lyn Link to comment Share on other sites More sharing options...
smorris Posted December 8, 2008 Report Share Posted December 8, 2008 Hi Alison Please give me a call this evening and we'll work out whats happening and quieten the beast!! Best wishes Sue (03) 9769 0248 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.