Mary Beth Posted February 11, 2009 Report Share Posted February 11, 2009 I can tell you....these templates only come in one size. You should be able to find them on the web site. It is the CL base that you would need to know if it is the right size for your machine. Link to comment Share on other sites More sharing options...
ramona-quilter Posted February 11, 2009 Report Share Posted February 11, 2009 Hey, MB, any updates on Michael? Link to comment Share on other sites More sharing options...
Mary Beth Posted February 11, 2009 Author Report Share Posted February 11, 2009 No ,I need to email them or give them a call and see what is going on.....I will let you know. Link to comment Share on other sites More sharing options...
circlelord Posted February 11, 2009 Report Share Posted February 11, 2009 Hi, Thank you all for your concern. I am almost back to normal. By the way, Carol's Gammill Classic has the new table with a 22" width. Her CL will not fit the old table with Velcro and a 24" width. It cannot be modified. Cheers, Michael Link to comment Share on other sites More sharing options...
lindasewsit Posted February 11, 2009 Report Share Posted February 11, 2009 Hi Michael! Glad you are starting to feel normal again! Keep getting better! linda Link to comment Share on other sites More sharing options...
circlelord Posted February 12, 2009 Report Share Posted February 12, 2009 Carol, All CL templates can be used on all the 24" machines. There are some templates made for Mid-arm machines with 16-18" throats -eg, the FanClam and the Swirls 12. Some mid-arm machines cannot use the 18" square templates, because the distance between the rails is less than 20 inches. I hope this helps. Cheers, Michael Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.