Jump to content

backup power


Recommended Posts

Originally posted by quiltingnanny

What do you use for backup power ? I inquired about a battery unit and was told I needed a line conditioner. What is that ? HELP Glenda

Glenda, what you want or need is a UPS (Uninterruptable Power Supply). You don't need a line conditioner. Someone is leading you down a winding trail... Are you wanting to get a generator to power up when your grid power goes down? That can be pretty spendy. Not sure you want to go there... A line conditioner is something that helps regulate your power. If you are on a grid, you don't need this (unless your power company feeds you really weird power surges and I highly doubt that)

The solution is easy: UPS. Here is a link with photos and more info. It's basically a battery to sustain power to your computer (or whatever you have electronic--e.g. longarm machine) so you have ample time to power down your computer (or whatever--e.g. longarm) without it shutting down immediately during an unexptected power outage. Normally the "shut down immediately" doesn't hurt the computer or electronics -- it's the surge of power coming back on that can fry a computer or electronic. The UPS usually also acts as a surge protector, too. It's a buffer between your computer/longarm and your wall socket where you get power. I have a UPS on my computer

http://en.wikipedia.org/wiki/Uninterruptible_power_supply

Ebay:

http://shop.ebay.com/?_from=R40&_trksid=p0.m38.l1311&_nkw=uninterruptible+power+supply&_sacat=See-All-Categories

Link to comment
Share on other sites

The important thing to look for in a UPS is the output - you need to have a sine wave output in order to keep the circuit board AND the motor both powered. Most of the back-ups you can have for computer systems have a square wave output - that's great for the circuit board, but not good for the motor. Since you are powering two different types of machines, the output is very important.

If you are looking for battery back-up systems, check for the output - a simulated sine wave is fine - the pure sine wave back-ups are very expensive!

Call in to the factory if you have any other questions!

Link to comment
Share on other sites

Thanks, Amy! I appreciate the info on the sine wave output and the difference between a simulated sine wave and pure sine wave. Good to know! You rock!

Hey, like you said, would you or someone at the Carroll factory recommend a brand name UPS with simulated sine wave that would be priced fairly?

Here's a link I found re: UPS with simulated sine wave

http://www.alphaenergy.com.au/s.nl/sc.2/category.38/.f

https://www.ebyte.com/search/new/tag/Simulated%20Sine%20Wave

Link to comment
Share on other sites

Guest Linda S

I use a UPS. It says I can keep going for 15 minutes after a power failure, but I've not found that to be the case. It does, however, provide much better power supply support than your typical power strip. If you saw the electricity in my house (I still have the brown fabric-wrapped wire around ceramic insulators behind the walls :o ) You'd know this is a real plus!

Linda

Link to comment
Share on other sites

I took the APQS Maintenance class from Amy and she recommended "smartKing"...models SMK-1500A or

SMK-2000A.. She noted that these units are able to output a pure sine wave which is capable of keeping the motor running and keep the circuit board powered

Raquel Birch

APQS California Sales Representative

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...