Jump to content

Rattle and Hummmm


Recommended Posts

No it's not a Dylan song.

My bobbin "area" started rattling. Usually a cleaning/oiling will do the trick, but it seems there is some jiggly play in the housing for the bobbin case. In addition, when I'm running the machine there is a distinct loud humming and rattle that I cannot fathom how to correct. When we test the timing, needle comes down but starts up ever so slightly and the opening on the bobbin case has rotated to the left as well.

Earlier my needle broke while quilting (yes it punched holes in the quilt), and we had to re-adjust the needle bar when I replaced the needle. Hubby said noise is coming from the horizontal housing behind the bobbin?

Help.

Cynthia

Link to comment
Share on other sites

Hi Sharon---

If your hummmm goes away when you put pressure on the top of the machine, see if the top cover is snugged down. Mine was loose recently and I tightened the phillips screws for the top and the noise went away! Just a thought.

Linda Rech

Five inches of rain in Olympia today!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...