vicheaton Posted July 5, 2012 Report Share Posted July 5, 2012 I wondered if it was possible to switch the rear handles/control on the Freedom? I like to panto using both hands on the left rear handle, but find it hard to turn the machine on using the right handle then smoothly get my hand over to the left side...I do the panto in non-stitch regulated mode. I find that I jerk a bit and all my starts look wonky. I took both handles off and checked it out, but I think I might have to move the sets of wires that run into each handles and reverse them....more complicated than just unplugging something. Any other ideas?? or is it a PPP issue? I've been longarming for years but on different machines...just got the Freedom used a few months ago. I had a Millie back in 2004 but really can't remember how that all worked, but there were more buttons on the left side... Link to comment Share on other sites More sharing options...
vicheaton Posted July 5, 2012 Author Report Share Posted July 5, 2012 Maybe I need to move the laser light to the right side??? Drill a hole on the right side of the machine for the little rod that the laser attaches to??? Then I'd just grip on the right instead of the left....hmmm....? Link to comment Share on other sites More sharing options...
Melanie Rouse Posted July 5, 2012 Report Share Posted July 5, 2012 Bumping to the top. Link to comment Share on other sites More sharing options...
Deb2bie Posted July 6, 2012 Report Share Posted July 6, 2012 Spam bumping!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.