sciquilter Posted July 19, 2005 Report Share Posted July 19, 2005 I'm so frustrated. :mad: I accidentally hit a pin when I was quilting a border and, of course broke my needle. I know the timing is now WAY OFF now (and I JUST had it re-timed). BUT - the major problem is that my machine turned off when I hit the pin like it blew a fuse and I cannot get it to come back on. It's not the wall outlet - so I know it has to be the machine. Is there a re-set button on the machine or did I completely ruin it? I'm so upset. Any advise would be most appreciated. Thanks, Mary Link to comment Share on other sites More sharing options...
Charlene Posted July 19, 2005 Report Share Posted July 19, 2005 Mary, Had something similiar happen to me. There is a fuse in a little black box area near the on/off switch. There will even be an extra fuse in the box that you can use. I was lucky in that I didn't have to retime my machine, just replace the fuse. Hope you have as much good luck. I then got extra fuses at Radio Shack, just in case. Charlene Link to comment Share on other sites More sharing options...
quiltaholi_518 Posted July 20, 2005 Report Share Posted July 20, 2005 Mary, I have done that, too. I used my extra, and ordered several more, very cheap. Don't be too upset, that is a safeguard so the machine doesn't overload! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.