marikds Posted January 26, 2009 Report Share Posted January 26, 2009 I'm a new Lenni owner and for Christmas I received the Lenni stylus and a set of pattern boards. My problem is that they didn't come with any instructions. I can't figure out how to mount the stylus. I took the laser off but I can't figure out how to clip or mount the stylus arm firmly to the laser rod. I'm not particularly good with mechanical things so I asked my husband for help. He couldn't figure it out either! Thanks for your help. Mari Link to comment Share on other sites More sharing options...
IBQLTN2 Posted January 26, 2009 Report Share Posted January 26, 2009 will send you pictures when I get home. I have a Lenni too and use the boards and the stylus. I will take a picture of where it mounts. jeanne Link to comment Share on other sites More sharing options...
RitaR Posted January 26, 2009 Report Share Posted January 26, 2009 Mari, It sounds like you are doing two different things in two ways in two places. Let me check my webshots and see if I have one of the topper set up with the stylus, pattern board, etc. Shall be right back if I do. RitaR Link to comment Share on other sites More sharing options...
jmcclannan Posted January 26, 2009 Report Share Posted January 26, 2009 I have a Lenni and a Circle Lord. I also have design boards and a stylus from R&S Designs and that stylus fits into the CL mount. Did you get your stylus from R&S? If so, it fits into the CL stylus holder. If you don't have a CL you need to contact R&S and order a mount from them. You will really enjoy your design boards once you have it all put together. Link to comment Share on other sites More sharing options...
marikds Posted January 26, 2009 Author Report Share Posted January 26, 2009 I purchased the stylus and boards from R&S. I don't have the CL. This is my first "gadget". I have a sinking feeling that I've completely misunderstood how to use the boards and stylus. Is there a website somewhere that gives more detailed instructions? Link to comment Share on other sites More sharing options...
Sew Cozy Posted January 26, 2009 Report Share Posted January 26, 2009 Mari I just purchased on from R&S for my Lenni. I to couldn't figure out how to clip or mount the stylus arm firmly to the laser rod. The laser rod is removed from the Lenni and the stylus arm is screwed into the laser rod hole. Good Luck!! Link to comment Share on other sites More sharing options...
marikds Posted January 26, 2009 Author Report Share Posted January 26, 2009 That's why there is the big screw! I couldn't think how it would be used with the laser rod in place. Thanks for all your help. I'm going to install the stylus tonight and try making heart wreaths!! Link to comment Share on other sites More sharing options...
Sew Cozy Posted January 26, 2009 Report Share Posted January 26, 2009 I am glad to see that I am not the only one that couldn't figure out why the big screw! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.