Busy Quilting Posted February 20, 2011 Report Share Posted February 20, 2011 I have just unwrapped my side views, and was hesitant to put on the right hand side. I have a circle of paper with the markings of a clockface around my tension dial, to help with the Pull of the tension spring and getting the right tension, markings for different threads etc. Then I had the idea to mark on the inside of the cover before I put it on the machine. Maybe these could be etched on in the manufacture! Now I just need to get to the machine, clean it and change it's faces! Lyn Link to comment Share on other sites More sharing options...
Georgene Posted February 20, 2011 Report Share Posted February 20, 2011 A clock face, how clever. It would be good for APQS or the side view makers? to etch this in. Link to comment Share on other sites More sharing options...
Quilting Heidi Posted February 20, 2011 Report Share Posted February 20, 2011 I have mine too but haven't installed them. Looks like we have to take everything off on the right hand side and I just haven't been up for this at the moment. Maybe tomorrow but we'll see. Link to comment Share on other sites More sharing options...
Dave-Jane Posted February 20, 2011 Report Share Posted February 20, 2011 I could probably do that marking! Putting everything together is pretty easy. I thought it would be scary, but it wasn't bad at all. Don't forget that the instructions are on our website and you can copy and paste them to your printing program if you want. If there's any problems let me know and I'll e-mail the instructions to you. Have a great day! Grasshopper Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.