Quiltinglady63 Posted June 4, 2007 Report Share Posted June 4, 2007 CQ WILL NOT STITCH EVERYTHING IS ON IT WILL ONLY TRACE THE PATTERN.THANKS BRENDA Link to comment Share on other sites More sharing options...
Stagecl Posted June 4, 2007 Report Share Posted June 4, 2007 Did you call Compuquilter...they are so helpful...or call the person who installed it. The only thing I know of that keeps it from stitching is the motor switch especially since it is tracing the pattern. Double check that one. good luck, Link to comment Share on other sites More sharing options...
Sue E. Posted June 5, 2007 Report Share Posted June 5, 2007 Did you set a stitch length using your mushroom buttons. I usually set this to 11 or 12. Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted June 5, 2007 Author Report Share Posted June 5, 2007 I did all of that but it still not sewing Link to comment Share on other sites More sharing options...
smorris Posted June 5, 2007 Report Share Posted June 5, 2007 Quiltinglady63 Check the small circuit board under the right hand back handle to make sure the plugs are all in, and make sure that little board is stuck securely to the underneath of the handle not hanging loose or the connections sometimes will not work. Flick switch on the front panel should be on, the motor box should be turned on and motor speed set above zero and dial to be set above 60%. Good luck Sue in Australia Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted June 5, 2007 Author Report Share Posted June 5, 2007 I got it to sew this morning I push the plug in the small motor on the end of the table next to the bigone I guess that was it but it sounds rought its like it is having ahard time sewing and in some of the areas it is going over it 3and 4 times what going on now.ALSO THE CABLE IS GRINDING PLEASE HELP.THANKS BRENDA Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted June 5, 2007 Author Report Share Posted June 5, 2007 Please help,Thanks Brenda Link to comment Share on other sites More sharing options...
smorris Posted June 5, 2007 Report Share Posted June 5, 2007 Hi Quiltinglady63 I'd ring Butch at SD and let him know your concerns - he's really good at solving problems quickly. Sue in Australia Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted June 6, 2007 Author Report Share Posted June 6, 2007 Thanks Sue, You have been great at helping me. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.