Lynne in Iowa Posted March 7, 2011 Report Share Posted March 7, 2011 For those of you who use R&S board on your quiltazoid, how do you keep them from moving around? I drilled a hole in one, but is still has some play if I'm not careful. Some of them I can't drill, because where the holes would need to be is in the groove. Would clamps work? Link to comment Share on other sites More sharing options...
Quilting Heidi Posted March 7, 2011 Report Share Posted March 7, 2011 Lynne I use clamps to hold it on. One at each corner if I can, if not opposite ends. You might also want to try a piece of double stick carpet tape under the one edge that you can't attach. Link to comment Share on other sites More sharing options...
witha'K'quilting Posted March 7, 2011 Report Share Posted March 7, 2011 I use clamps too. Small ones just like the side clamps that can with my longarm. Link to comment Share on other sites More sharing options...
TerriVB Posted March 7, 2011 Report Share Posted March 7, 2011 I am considering purchasing the holder that QZ sells for this very purpouse--it is a smaller version of the holder for the longboards when you use them from the front. Looks like an aluminum square with rubber grip strips that screws onto the base plate. Hope this helps some. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.