jhwolf Posted December 29, 2011 Report Share Posted December 29, 2011 Okay, I see how this would work for viewing the bobbin but can't seem to imagine how it would work for pantos. Can you show how this works? Thanks! Judy in MO Link to comment Share on other sites More sharing options...
LeeAnn Posted December 29, 2011 Report Share Posted December 29, 2011 I'm like Linda as I leave my extended base on all the time. I have a Gammill and it looks like from the pic that it "looks" straight up from just beside and below the needle. How could you adjust it for an extended base? Link to comment Share on other sites More sharing options...
LeeAnn Posted December 29, 2011 Report Share Posted December 29, 2011 I looked at the pics again and I think I would have to get a new base extender as mine is not clear. right? Link to comment Share on other sites More sharing options...
RoseCity Quilter Posted December 30, 2011 Report Share Posted December 30, 2011 Originally posted by jhwolf Okay, I see how this would work for viewing the bobbin but can't seem to imagine how it would work for pantos. Can you show how this works? Thanks! Judy in MO Judy, what I did was aim the second camera at the red dot of my lazer pointer. When I move my Milli from the front, I watch the lazer dot on the monitor and make it follow the panto line. There is a picture on the other thread,close to the bottom http://apqs.com/quiltboard/viewthread.php?tid=31076&page=1#pid399188 Link to comment Share on other sites More sharing options...
Wingsthing Posted January 2, 2012 Report Share Posted January 2, 2012 Just made a bracket up for a extend base that is not clear. This one is made up for a Gammill. I received a very good report from an owner of a BobbinCam today that runs an IQ. I hope she post in the next day or so. Link to comment Share on other sites More sharing options...
LeeAnn Posted January 2, 2012 Report Share Posted January 2, 2012 That is just one less excuse for me to get one! Thanks Kevin! (still thinking) Link to comment Share on other sites More sharing options...
jimerickson Posted January 2, 2012 Report Share Posted January 2, 2012 Kevin: Do you have a website or e-mail address where I can get in touch with you? I have some questions and don't want to bore everyone here with the details. Thanks. Jim You can e-mail me at: jimatthelake903@yahoo.com if you'd like Link to comment Share on other sites More sharing options...
LeeAnn Posted January 2, 2012 Report Share Posted January 2, 2012 Jim, you can contact Kevin at kz9d@charter.net He replied to me quickly. Link to comment Share on other sites More sharing options...
jimerickson Posted January 2, 2012 Report Share Posted January 2, 2012 Thanks, LeeAnn. Regards. Jim Link to comment Share on other sites More sharing options...
Bonnie in Ok Posted January 2, 2012 Report Share Posted January 2, 2012 So how hard is it to remove the cutter? I never use mine and don't like it I have a 2007 Millie. I do have a clear bas extender so where would I get one to fit the machine if I did take the cutter off? Thanks Bonnie Link to comment Share on other sites More sharing options...
Matt Sparrow Posted January 2, 2012 Author Report Share Posted January 2, 2012 you can also contact Kevin through http://bobbincam.com Bonnie, it is so simple! Remove the four black plugs on the side of the cutter. From there you can access the four screws attaching it to the head. Then take the back cap off the back of the cutter and undo the two connections. Easy as pie. You can then order a new base expander from APQS. Link to comment Share on other sites More sharing options...
clovismom Posted January 2, 2012 Report Share Posted January 2, 2012 I purchased the Bobbin Cam and I love it!! The screen is very clear. Kevin is very good about answering questions. In fact he gave me his cell phone number and I was able to reach him everytime (just had to remember the time zone difference). I use an extend table (clear lucite) and the camera works fine with it on. Raquel Birch APQS Respresentative CA Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.