Pwlesh Posted March 25, 2019 Report Share Posted March 25, 2019 When I am at the bottom of panto pattern hard to move machine an when at the top of pattern it glides along smoothly seem almost like balance issue? Link to comment Share on other sites More sharing options...
Kueser Posted March 26, 2019 Report Share Posted March 26, 2019 Have you checked to see if you are not rubbing up against the stabilizer bar? Link to comment Share on other sites More sharing options...
Pwlesh Posted March 26, 2019 Author Report Share Posted March 26, 2019 Not sure which bar you are referring to Link to comment Share on other sites More sharing options...
jimerickson Posted March 26, 2019 Report Share Posted March 26, 2019 More likely the take up roller. At any rate, pull the machine to where it moves poorly, and then look for any contact the machine head is making with rollers. Good luck. Jim Link to comment Share on other sites More sharing options...
Pwlesh Posted March 26, 2019 Author Report Share Posted March 26, 2019 Thanks I will check it out Link to comment Share on other sites More sharing options...
dianne31331 Posted March 26, 2019 Report Share Posted March 26, 2019 I was having problems with my Lenni moving, discovered that my horizontal channel lock was vibrating loose and causing Lenni problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.