mskazooli Posted January 4, 2013 Report Share Posted January 4, 2013 Hi, guys, I am finally back to quilting and have a "silly" question. Do you find you have more control using the stitch regulator or not using it? I have a Millie and am getting back in the groove and was wondering if I should practice with or without the SR? Opinions welcome! Link to comment Share on other sites More sharing options...
Zora Posted January 4, 2013 Report Share Posted January 4, 2013 For me, it depends on what kind of quilting I am doing, For stitch in the ditch, SR (stitch regulated) is the easiest way to go. For outlining applique, or for doing bump back feathers (where you backtrack) for me, SR is also the way to go. Some people prefer non SR for those feathers, though. If I am doing a design that is going to require abrupt direction changes, I also use SR. If you know exactly where you are going, non SR is fine, but if you need to hesitate and think it over, I find non SR to be kind of intimidating. Small background fills go more smoothly witn non SR. That said, I have Quilt Glide on my machine which is designed to smooth out that type quilting even if you are in SR mode. I think its a matter of your skill level and your confidence level. I would certainly practice with non SR, and switch to SR for instances where you don't get the results you like. These tools are available to make quilting easier, so I don't think people who never use SR are "better" quilters..they just get the results they want in a different way. Link to comment Share on other sites More sharing options...
Liam Posted January 4, 2013 Report Share Posted January 4, 2013 Well said Lynn! I would like to add that I find it easier using the non-stitch regulated mode when doing a lot of my pantos. This may be due to I started out with a Ult-2 that was not stitch regulated. All I can say is ppp and you will find your groove. Link to comment Share on other sites More sharing options...
o2b Quilting Posted January 4, 2013 Report Share Posted January 4, 2013 I am like Lynn but would like to add that I find that I prefer non-SR when doing small background fills if I am working on my machine without Quilt Glide. If I am using the machine that has Glide then I use the SR/Glide combination. I try to practice often not using the SR. Link to comment Share on other sites More sharing options...
LisaC Posted January 5, 2013 Report Share Posted January 5, 2013 I agree with what everyone has said. I also found at first when in the non-stitch regulated mode I felt anxiety over the machine running what seems so fast and always felt I needed to hurry. After practicing in non SR mode, I got over that; got my own rhythm to make my stitches even and all is good in either mode! Have fun practicing! Link to comment Share on other sites More sharing options...
jimerickson Posted January 5, 2013 Report Share Posted January 5, 2013 I have an Ult2 with Intellistitch, and stitch in regulated mode all the time. The I/S Turbo on my machine has a stippling setting, and that is what I use for background fill, and for some outlining like on applique. When Helen installed the I/S, she said she did her background fill in non-regulated mode, but I've just never found a need to do so. Jim Link to comment Share on other sites More sharing options...
mskazooli Posted January 6, 2013 Author Report Share Posted January 6, 2013 Thank you so much, everyone! I find that when I know where I'm going I tend to be more comfortable with the SR but I do feel a bit rushed! I am trying to practice every day at least for a little while and will do so without the SR. . . it can't hurt to get proficient both ways, right? Thanks again for the input! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.