Quiltinglady63 Posted January 22, 2010 Report Share Posted January 22, 2010 Won't run in manual please help:( Link to comment Share on other sites More sharing options...
Katydids Posted January 22, 2010 Report Share Posted January 22, 2010 Need more information.... Is it powered? It works in SR mode, but not in manual? do you have the speed setting up? have you tried both front and back handles? Do other functions work? Link to comment Share on other sites More sharing options...
ffq-lar Posted January 22, 2010 Report Share Posted January 22, 2010 An APQS machine, right? Make sure you have advanced the SPI (speed) at least a bit or it won't stitch in manual. If that isn't it, maybe your controls are bad. With the mushroom handles you can swap the back to front. Otherwise, I'm outta ideas for a quick fix. Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted January 22, 2010 Author Report Share Posted January 22, 2010 IT HAS POWER THE SR WILL PEEP THE NEEDLE WILL GO UP AND DOWN BUT WILL NOT STITCH Link to comment Share on other sites More sharing options...
witha'K'quilting Posted January 22, 2010 Report Share Posted January 22, 2010 by chance is there thread wrapped around the bobbin pin possibly preventing the machine from being able to stitch? Link to comment Share on other sites More sharing options...
Quiltinglady63 Posted January 25, 2010 Author Report Share Posted January 25, 2010 Got it running, called Amy she said it was the circuitboard. Thanks Amy , and to all. Thanks Brenda Link to comment Share on other sites More sharing options...
LinneaMarie Posted January 25, 2010 Report Share Posted January 25, 2010 When in doubt, ask Amy! Link to comment Share on other sites More sharing options...
JoAnnHoffman Posted January 25, 2010 Report Share Posted January 25, 2010 You have to have the stitch length or motor speed set higher than zero. When you turn on your machine it starts at zero. Raise it up a notch. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.