caddyhomes Posted October 7, 2015 Report Share Posted October 7, 2015 How can I explain my problem? The stitches are not following each other in an even line. They have a slight zig and a zag to them, making each section of stitching looking quite wonked. What do I need to change to get them back to a beautiful flowing sequence of stitches? Link to comment Share on other sites More sharing options...
Cagey Posted October 7, 2015 Report Share Posted October 7, 2015 I have no idea. I would suggest you take a close up in focus picture for the experts to look at, so they can better help you. Cagey Link to comment Share on other sites More sharing options...
Primitive1 Posted October 8, 2015 Report Share Posted October 8, 2015 It may have something to do with the height of the hopping foot...I would do a search for hopping foot height... Link to comment Share on other sites More sharing options...
mamaahma Posted October 8, 2015 Report Share Posted October 8, 2015 Try turning your needle to the left a little bit. I've had that happen to me a few times. Link to comment Share on other sites More sharing options...
RunningThreads Posted October 9, 2015 Report Share Posted October 9, 2015 Too small of a needle for the thread can do this. I seem to remember Dawn mentioning that a hopping foot that isn't level is also a common problem. Put the hopping foot in the lowest position and try to slide a business card under the foot from all directions. If it is not level you will have to bend it back into place. Nigel Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.